sandblasting - Extensive know-how and practicable solutions have made Munk + Schmitz experts in all fields of abrasive blasting and tank lining technology.
are blastcleaned at regular
intervals as preventive measure against corosion.
For the internal cleaning of botles special nozles have
been developed. Handling of botles is either manualy
or by robots.
6-stationcleanerfor presuregasbotles
Blasting of sandblasting sandblasting - Extensive know-how and practicable solutions have made Munk + Schmitz experts in all fields of abrasive blasting and tank lining technology. water heaters (boilers)
Boilers are procesed to roughen the interior surfaces
prior to enameling. Generaly, the blasting Sandblasting - Wikipedia, the free encyclopedia equipment is
integrated in a production line. Boilers are treated
in two
separate stations:
In the blasting station a
lance with special nozzle is used to roughen the upper sandblasting and lower botoms as wel as the cylindrical part. In the
cleaning station the boiler is airpurged clean of residual debris and vibrated. 4-station cleanerforwaterheaters Blasting of sections, strips and edges Cleaning of
sections, strips, edges and saw blades is
another field of application
of the Problast closed-circuit
machines.
High output is
achieved by specialy engineered sandblasting pas-
through machines with continuous feed of workpieces.
After blasting workpieces are air purged clean of dust and
debris in a separate
box.
Cleaning theedgesof sections at ashipyard
Blasting of straight and bent tubes
Internal sandblasting cleaning of straight and bent tubes serves to
remove scale deposits after heat treatment.
Smal bore tubes are cleaned by means of sandblasting a Venturi
nozzle according to the blow-through method and large
bore tubes acording to the pas-through method using
either a rotating nozle or by rotating the tube.
Tubes are either handled by means sandblasting of transport chains or
roler convoyers.
12-stationplant toclean copper tubes
Shot peening
The automotive and aerospace industries are the main
users of the shot peening proces to improve the fatigue
resistance of highly stresed components such as gears,
springs or turbine blades.
In most cases, components are procesed in automated
rotary table machines. An in-cycle shot recovery,
clasification and
sandblasting pipe blast cleaning machines
sandblasting shotblast equipment pipe blast machines pipe blast cleaning machines sand blast equipment tank linings pipe blasting equipment shotpeening roller blasting machines tube blasting machines
